Table of Contents
How do I set up BrightSign unit?
Go to Tools -> Setup BrightSign Unit and enter the desired settings. When you finish, click Create Setup Files and save to a blank sd card. Disconnect the player from power, insert the sd card (with setup files) into the player, then connect the power.
How do I set up a device in BrightSign?
- Enable the Content Cloud 30-Day Trial. Go to the Admin tab. …
- Create a New Setup Package. Click on Device Setup. …
- Prepare Player for Reprovisioning. Go to the Admin Tab and choose Device Setup. …
- Reprovision Players. …
- Publish Content.
How do I activate my BrightSign device?
Connect the BrightSign player to your network via Ethernet cable. Power on the BrightSign player. Follow the on screen instructions to get to the main BrightSign player setup page. Set up the device as ‘Stand Alone’
How do I connect BrightSign to the Internet?
- Take out the SD card and copy the Wallboard Brightsign client files onto it. Reinsert the SD card.
- Reboot the device and remove the Ethernet cable.
- The Wallboard client will start now with the Wi-Fi connected.
What is the IP address of my BrightSign unit?
Click the settings drop-down icon in the top right corner of Device List and check the IP Address box. The IP address of each device connected to your BrightSign account will be listed on the far right of the info bar under All Devices > IP Address.
Can you use BrightSign without a SD card?
No, the BrightSign player is not shipped with an SD card, but an SD card is required to store content for playback, whether you are loading content onto a card directly or updating content over the network.
Is BrightSign free?
The Control Cloud level of service is absolutely free for all BrightSign players, granting you instant access and control with your preferred CMS. For an all-encompassing suite of tools for network and content management, the Content Cloud level of service is available as an affordable annual subscription.
What is the default login for BrightSign?
Log into the BrightSign configuration page using the default login of “admin” and password of “The Serial number located on the bottom of your BrightSign player” unless you have changed those login credentials.
What is the use of BrightSign?
- Create Video Walls with a single player.
- Control Multi-Screen Experiences from any location.
- Deliver powerful Interactive Demos.
- Deploy Digital Signage at scale.
- Power memorable 3D & Immersive experiences.
- Create crisp Audio experiences.
Why is my BrightSign not working?
Issues can usually be broken down into one of these categories: Non-network issues: The player may not have storage to write to, or its subscription may have expired. No Internet access: This often caused by a DNS/port configuration issue on the local network.
What is a BrightSign device?
An Introduction to BrightSign Players BrightSign is a high-end player for digital signage content. Players are devices that connect to the internet and screens to present that content.
How do I install BrightSign firmware?
- Download the correct firmware file from the list below.
- Copy the . bsfw file to the root directory of your SD/microSD card.
- Insert the card into your BrightSign player.
- Power on the BrightSign player.
- The Pwr LED will flash during the update process to let you know the update is taking place.
How do I set up BrightWall in BrightSign?
- Sign in to your BrightSign Network account by navigating to Tools > Sign In to BrightSign Network.
- After creating your BrightWall presentation, click the Upload to network button in the top-right. …
- Navigate to the Manage > Status tab.
What format is the SD card for BrightSign player?
You must format your SDHC or SDXC card as FAT32 or exFAT.
What is the username and password for BrightSign?
Log into the BrightSign configuration page using the default login of “admin” and password of “The Serial number located on the bottom of your BrightSign player” unless you have changed those login credentials.